The shear beam load cell is a type of weighing load cell, also known as a force sensor. In this device, one end is fixed while the other end is subjected to a load. It boasts a low center of gravity, simple installation, and excellent interchangeability. This load cell is ideal for applications such as truck scales, electronic scales, platform scales, hopper scales, livestock weighing, and other related industrial weighing needs.
Contact Us
Products
Blogs
The Shear Beam Load Cell is a type of weighing load cell, often referred to as a force sensor. One end of the device is fixed, while the other end is subjected to a load. It has a low center of gravity, making it easy to install and highly interchangeable. This load cell is suitable for applications such as truck scales, electronic scales, platform scales, hopper scales, livestock weighing, and other related uses.
Fixed on one end, loaded on the other (common in platform scales).
It is appropriate for use in truck scales, electronic scales, platform scales, hopper scales, livestock weighing applications, and other related situations.
Materials: Alloy Steel or Stainless Steel, Class C3, IP65
If you’re uncertain about which shear beam load sensor to select, take into account the project requirements, platform dimensions, precision needs, and customization options. You may also reach out to HAIBO’s engineering team for assistance with your decision-making and technical questions.
Please refer to our specifications. The smallest capacity we offer is 300 kg, and the maximum capacity is 25 tons. You can select the model based on our recommendations: the capacity and size of the sensor should be determined according to your application and usage scenarios.
– For small capacities (less than 300 kg): we recommend using a single-ended shear beam, which is cost-effective and economical.
– For medium to large capacities (1 to 25 tons): we suggest a double-ended shear beam, as it provides good resistance to side loads.
– For very large capacities (greater than 25 tons): we recommend using multiple sensors in parallel, such as for truck scales.
参数 Parameter | 典型值/范围 Typical Value/Range |
额定容量 Rated Capacity | 300 kg ~ 25t |
精度 Accuracy | 0.02% ~ 0.05% FS |
输出灵敏度 Sensitivity | 2.0 mV/V ± 0.1% |
激励电压 Excitation Voltage | 5~15 VDC（推荐 10V） |
绝缘电阻 Insulation Resistance | ≥5,000 MΩ (50VDC) |
防护等级 IP Rating | IP65 |
材质 Material | 不锈钢 Stainless steel (SS) 或合金钢 Alloy steel |
温度补偿范围 Temp. Compensation | -10°C ~ +65°C（标准 Standard） |
过载保护 Overload Protection | 150% FS（安全 Safe） |
蠕变 Creep | ±0.02% FS/30min |
Shear beam load cells are commonly utilized in industrial weighing and force measurement because of their compact design, high precision, and strong resistance to eccentric loads. In particular, consider the shear beam load cells offered by HAIBO-Force Sensor. Choosing our products can greatly enhance the performance of your solution, allowing for efficient upgrades and convenient monitoring of your weight management system.
Application:
1. Static or dynamic weighing platforms in factories, warehouses, and logistics centers.
2. Used in pallet scales or small weighbridges to measure cargo weight
3. Truck scales (axle load measurement for overload control).
4. Monitoring material levels in silos, hoppers, or liquid storage tanks.
5. Measuring flour in food processing plants or cement in construction material storage.
6. Silo & Tank Weighing
7. Conveyor Belt Weighing
Haibo’s team can help you customize force sensors, making your solution more convenient and cost-effective.
Load cell sensors are connected to a junction box and then linked to a single indicator A12E. This setup not only helps save costs but also achieves the practical goal of having multiple sensors work together with one indicator.
The load cell force sensor range is between 1-25 tons, suitable for transmitting data over long distances. It is water and dustproof and can output both 0- 5V and 4- 20mA simultaneously. IP65 rated (anti-interference version).
Our models 8-serial load cell sensors connected to a single A12E indicator enable real-time data collection and printing.
Multiple types of shear beam load sensors are available, complete with a junction box for easy connection. You can choose from options with 2, 4, 6, or 8 holes.
Each load cells have three dimensions for choice: M12, M14, M16.
.
If you require a shear beam load cell, don’t hesitate to contact us for immediate technical support and a competitive quote.
Haibo is a large manufacturer of Various Load Cells. We design and manufacture a wide range of and high precision Class C3 and competitive prices, Single point load cells, shear beam load cells, micro load cells, truck scales load cells, Weighing alex pads, pressure sensors, torque sensors, etc.
Contact us right now to get more information, we will have people reply within 12 hours.
You can get a price of this model or send us any question to get any information you would like to know, we will reply to you soonest.